This Xeye Thermal CH50 is the thermal image converter of the moment. Thanks to its 50mm lens and 12 m sensor, you have a superior image. You can observe heat sources up to +/- 2500 meters with this viewer. You can also use this Xeye Thermal CH50 as a spotter, thanks to the included eyepiece.
This attachment has a resolution of 640×512 pixels. In combination with the 50 mm lens and 12 μm sensor, there is nothing that you can miss. These binoculars have a 1x magnification, so you can use your field of view optimally.
You can attach this Xeye thermal image converter to your own rifle scope using a Rusan ARM52 ring. Which mounting ring you need depends on the outer diameter of your own rifle scope. Please contact us for this.
Unlike other thermal imaging attachments, you don’t have to give up on this Xeye Thermal CH50. So you put it in front of your own rifle scope and you can shoot with it. This is unique!
The Xeye thermal image converter works on 2 CR123A batteries. Make sure you always have some extra batteries with you, because they run out pretty quickly. You can also connect this viewer to a power bank if you want.
Thanks to its dimensions of 166x60x68 (LxWxH in mm), this thermal imager is quite compact and easy to carry. The weight of this Xeye is only 420 grams. Thanks to the IP66 rating, this spotter is resistant to rain or snow.
With the Xeye you have 5 different color palettes at your disposal, of which the following are the most used:
- black hot
- white hot
- red hot
You can change the colors of your image per situation. Ideal for when you can’t see well.
– Resolution 640×512
– Sensor 12 m
– Frame 50 Hz
– Focusing Manual
– Field of view 8.8×7.0
– Pallets Yes
– Battery type 2x CR123A
– Working temperature -10 to + 50 degrees
– Waterproof IP66
– Dimensions 166x60x68 (LxWxH in mm)
– Weight 420 grams