Thermal imaging rifle scope Pard SA19 1.5-6x incl. weaver mounting

This Pard SA19 1.5-6x thermal imaging rifle scope has a remarkably low weight of only 330 grams (excluding battery), which has a positive influence on the balance of your rifle and it also increases the ease of carrying and comfort in the field.

It features a 384×288 sensor with 17 µm pixels and a frame rate of 50 Hz. Where previously the sensor had to be calibrated with a shutter for thermal changes in the image, the Pard SA19 1.5-6x thermal imaging rifle scope is shutterless. This saves weight, but also reduces power consumption. In this case, the rechargeable 18650 Li-ion battery can provide power for up to eight hours. Start up takes less than two seconds.

The 1024×768 color display can display five different crosshairs, offers Picture In Picture and you can switch between five color schemes, namely:

– White hot
– Black hot
– Red hot
– Iron red
– Sky

A gyroscope provides a very stable display and an E-compass is also built in. The Pard SA19 1.5-6x thermal imaging rifle scope has a large detection range; a person can be observed up to 750 meters away, a vehicle up to 1200 meters. The magnification is 1.5-6x, which gives this thermal imaging rifle scope a wide zoom range. The eyepiece can be adjusted on your own eye over a range of +/- 5 and focusing of the image is done with a rotatable objective.

You can make videos with the Pard SA19 1.5-6x thermal imager, it has a CVBS video output. It is waterproof according to the IP67 standard and is recoil resistant up to 6000 Joule.