Hikmicro Alpex A50TN Digital Day & Night Vision Scope 940nm IR

This HikMicro Alpex A50TN 940 nm IR night vision scope has an externally mountable infrared lamp with a frequency of 940 nm. This infrared light gives off a slightly less visible red glow compared to an 850 nm infrared lamp. With a 50 mm lens that projects infrared light onto a 1920×1080 pixel (2MP) sensor, a pin-sharp image is projected onto a 0.39″ (1024×768 pixels) OLED display with a very high SNR, which stands for Signal to Noise Ratio. This means there is little noise and produces a high-contrast image with lots of detail. The HikMicro Alpex A50T 940 nm IR night vision binocular uses image enhancement software that removes purple edges and even estimates fog density to clear image during fog. The image is magnified 3.5x by default, and thanks to a 2x and 4x digital zoom, the image can also be set to 7x and 14x magnification. You can choose from as many as five different crosshairs in seven different colors, and shooting in is a breeze thanks to the freeze & zoom function, where you simply aim at a target at desired distance and take a shot. Then aim again at the target and fix the image. It is then a matter of adjusting the reticle via the turrets for elevation and lateral adjustment to the depicted point of impact and the HikMicro Alpex A50T 940 nm IR night vision scope is fired in. Conveniently, the HikMicro Alpex A50TN 940 nm IR night vision scope can be traditionally mounted with 30 mm mounts and the rechargeable battery can provide up to 12 hours of power. The field of view is 7.7 x 5.8 degrees and there is a picture in picture mode to keep a good overview of the surroundings. The detection distance is up to 600 meters during the day and 550 meters at night. By the way, the night vision scope is waterproof to IP67 standards. The Alpex A50T 940 nm IR night vision scope has an internal memory of 64 MB to store images, but HikMicro also offers an app for streaming, downloading and sending images.